The automotive injector is an important part of the engine. It delivers fuel to the engine with each combustion. Although it has a long service life, it is recommended to have it serviced regularly to ensure its proper functioning. Discover here some cleaning tips and techniques for optimal maintenance.
Tips for keeping your injector in good condition
There are a few simple tips you can use to maintain your car injector. The first is to use quality fuel and good engine oil. Quality oils are well-produced. They often contain additives, which can delay potential clogging problems. Avoid fuels and oils with incredibly low prices.
The second tip is to make sure you always have fuel in your tank. You may not know this, but an empty tank is conducive to corrosion, and in this case, the injector may be affected. The third tip is to regularly clean the engine of carbon buildup.
To complete this task, it’s best to visit a car repair shop. Choose a hydrogen-powered one. It’s much more efficient. The final tip is to drive regularly on the highway. By driving at a certain speed for a good distance, you’ll warm up your engine, which will help clean it.
Use additives
It’s true that applying the tips mentioned above will extend the lifespan of your car injectors. However, for better maintenance, you’ll need to clean them from time to time. Using cleaning additives is the easiest technique to apply for this purpose. You can find this type of product almost everywhere on the market.
However, be aware that additives are only used as a preventative measure. If your injectors are already completely clogged, the additive will have no effect. All you have to do is pour a specific amount of the product into your almost empty tank. Then, add fuel.
Pressurized tank cleaning
It must be done by a professional. Much more effective than using additives, this technique allows you to rid the injector of all its dirt using a device with pressurized tanks.
The principle is quite simple. A product is sent to the injector via a ramp. All this is done with the fuel supply previously cut off. This technique represents both cleaning and descaling. You will have to pay between 45 and 125 euros to have it done.
Ultrasound
If dirt persists despite proper cleaning of the injector, ultrasonic cleaning is necessary. In this case, the injector will be placed in an ultrasonic tank containing water mixed with a specific product, heated to 55 degrees Celsius. The waves emitted will remove any remaining dirt atoms.
The duration of the treatment depends on the condition of the injector in question. Generally, it takes a maximum of 25 minutes. For around 50 euros, you can already perform an ultrasonic cleaning. If possible, disassemble the injector before going to the mechanic. This will help you reduce the bill.
The test bench technique
This is the best technique for cleaning automotive injectors. In addition to cleaning, it allows you to check the injector’s optimal functioning, as well as its sealing and flow rate.
Ultimately, there are several ways you can maintain your automotive injectors. You can use cleaning additives, pressure tank cleaning, ultrasonic cleaning, or bench cleaning.
